Garrattfan's Modelrailroading Pages
B&O EM-1
Repair of the handrail
The very moment I tried to bend the handrail knobs back into shape they broke. Luckily I have an ample supply of handrail knobs, the longest of which have approximately by a few tenths of a millimetre the appropriate length. I pulled the old knob heads off the rail. I also pulled out the stems of the knobs. I felt more like a dentist then anything else. |
|
While working on the loco I noticed nasty scratch marks on the boiler. This loco must have had quite a history. | |
The two holes to be filled.
The left hole shows signs of glueing. Compare it t the right hole. It looks as if someone else must already have been working on it.
I drilled the original holes. I drilled the holes to 0.8 mm, the size of the new knob's base. |
|
Once glued, again with epoxy, blue-tack held the stuff in place. | |
Two new handrail knobs in place.
The left handrail knob has come a bit out of its hole. That is only visible on the photos and on very, very close inspection. |
|
A touch of SM302 Revell Black and another job done! |
Sign my
GuestBook